DecoFILM^®Soft Metallics

Product Overview

• Gives a smooth and soft finish, looks like metallic screenprint • Has over 40 colors and patterns • Stretchy and durable • Sticky carrier for easy repositioning DecoFILM^®Soft Metallics offers a textured, chrome-like surface. Durable and easy to cut and weed. Add a fun unexpected metallic finish to your designs. The pressure-sensitive carrier allows easy repositioning.

DecoFILM^®Soft Metallics

Design Sample

Cotton, Uncoated Polyester, Fabric Blends, Linen, Wool

Excluding Nylon, treated or dyed garments

Available Widths (in.):
19.5” only

Available Lengths (ft.):
15’, 30’, 45’, 60’, 90’, and 162’ rolls

3 mils/75 microns

DecoFILM^®Soft Metallics

Application Instructions

Cutting

BLADE ANGLE
45° Blade

Mirroring

REVERSE READING
Cut this material into a mirror image.

Temperature

VARIABLE
302°-320° F

Pressure

Firm Pressure

Time

VARIABLE
7-8 seconds

Peel

Peel cold, then cover with a PTFE sheet and repress for 3-5 seconds.

Washing

Wash inside-out, cold water, gentle cycle. Tumble dry low.

Layerable?

Top layer only

If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production.

IT'S BEST TO TEST!

If you’re using this product for the first time or trying a new garment, it’s always best to test on an inconspicuous area or spare garment before applying final production.

Laser Compatible

DecoFILM^®Soft Metallics

Cut Settings

Material: Iron-On

Pressure: Default

Blade: Fine-Point Blade

Material: Heat Transfer, Smooth

Blade: 2

Speed: 8

Force: 6

Speed: 8

Force: 12

Blade: 45° Blade

Please Note

Every blade and machine is a little bit different- always remember to test cut! These cut settings are a starting point to be adjusted to your blade and machine.

DecoFILM^®Soft Metallics

Cut Settings

DecoFILM^®Soft Metallics

Tech Info

Tech PDF includes product thickness, roll sizing, and other technical information

Product Videos

After washing, always iron inside out. Do not iron directly on the film. Please note: repressing keeps material looking consistent throughout wash cycles, but will give it more of a brushed metal appearance.

Splices in rolls may cause material to conform around edges of tape, but will not affect the cutting or the finished look.

Please note: the White is translucent. The following colors are translucent in some areas and the garment color will show through: Green/Black Camo, Earthtone Camo, Grey Camo, Blue/Black Camo. The following colors are slightly translucent, but does not allow color to show through when pressed: Rainbow Oil, Leopard Silver, and Leopard Gold.

Please note: the Holoshine colors have a horizontal line going down the middle of the roll and a vertical line approx. every 29.5″. Is is part of the manufacturing process and is not a defect.