GlitterFlex® II films produce a multi-faceted glitter effect with flexibility! It is made with a flexible and durable polyurethane polymer that encapsulates reflective polyester particles. The polyester glitter particles allow this film to be sublimated.

Use GlitterFlex® II when you want the sparkle in your designs to stretch!

Product Photos

Application Instructions

We have reformulated the GlitterFlex® material so that it is easier to plot and weed. Due to this, please note that the directions have changed. The temperature for application has been raised from 285°F to 330°F-335°F and the carrier can be peeled warm after the initial press.

As GlitterFlex® II films are thicker than most of our other films, simply increase the downward pressure of your knife blade in order to ensure clean cuts and easy weeding.

Blade – 45°

Cut – Remove heat liner then cut in mirror image

Temp – 330°-335° F

Pressure – Firm, even.

Time – 3 seconds

Peel – Warm, use Teflon and re-press for 10 seconds

Care – Wash inside out, cold water, gentle. Tumble dry low heat.

Sublimation – Heat sublimation on top of already pressed vinyl at 390° F for 30 seconds.

Applies to: Cotton, Uncoated Polyester, Fabric Blends, Spandex, Lycra, Wool, Linen Excluding Nylon

Product Colors

  • GF2-5820_Silver
  • GF2-5821_Red
  • GF2-5822_Blue
  • GF2-5823_Gold
  • GF2-5824_Green
  • GF2-5825_Black
  • GF2-5826_Clear_White
  • GF2-5827_Off_White
  • GF2-5828_White
  • GF2-5829_Yellow
  • GF2-5830_Fuchsia

Tech Info

DOWNLOAD THE PDF